SP10867QL 208 V 6000 W Resistored Stainless Steel Heating Element

Rheem $50.80

 

 

PRODUCT OVERVIEW:
The electric heating element provides the source of heat for electric water heaters. See the Technical Bulletins below for additional information.
This part replaces AP10867QL-4.
Warning Message WARNING: For your safety, be sure to read and understand the manufacturer’s Use and Care Manual in its entirety carefully prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instructions or any terms within them, seek professional advice.

California Proposition 65 Warning:This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

 

Watt Density Classification :      
Input Voltage (V) :      
Wattage at 208V (W) :      
Watt Density at 208V (W/sq. in.) :      
Cold Resistance (ohms) :      
Outer Sheath Material :      
Resistored :      
Configuration :      
Element Diameter (in.) :      
Element Length - Flange to Tip (in.) :      
Mounting Type :      
Actual Thread Size - Outside Diameter (in.) :      
Nominal Thread Size - (in.) :      
Threads per Inch :      
Thread Type Series Designation :      
Hex Head Size - Across Flats (in.):      
LWD 
208 
6000 
84 
7.20 
Stainless Steel (Incoloy) 
Yes 
Foldback 
.316 
19.25 
Threaded 
1-9/32 

11-1/2 
NPSM 
1-1/2

**Shipping weights and dimensions are for reference only for the purpose of calculating freight charges. 
For parcel shipping, dimensional weights are used by FedEx to determine the rate rather than the actual weight.


Shipping Weight Actual (lbs.):        1.225
Shipping Weight Dimensional (lbs.):        1.225
Shipping Height (in.):        1.8
Shipping Length (in.):        23.4
Shipping Width (in.):        3.55
Shipping UPC:        020352193274

 

 

Read more
Current stock 0
Add to wishlist

Description

 

 

PRODUCT OVERVIEW:
The electric heating element provides the source of heat for electric water heaters. See the Technical Bulletins below for additional information.
This part replaces AP10867QL-4.
Warning Message WARNING: For your safety, be sure to read and understand the manufacturer’s Use and Care Manual in its entirety carefully prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instructions or any terms within them, seek professional advice.

California Proposition 65 Warning:This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

 

Watt Density Classification :      
Input Voltage (V) :      
Wattage at 208V (W) :      
Watt Density at 208V (W/sq. in.) :      
Cold Resistance (ohms) :      
Outer Sheath Material :      
Resistored :      
Configuration :      
Element Diameter (in.) :      
Element Length - Flange to Tip (in.) :      
Mounting Type :      
Actual Thread Size - Outside Diameter (in.) :      
Nominal Thread Size - (in.) :      
Threads per Inch :      
Thread Type Series Designation :      
Hex Head Size - Across Flats (in.):      
LWD 
208 
6000 
84 
7.20 
Stainless Steel (Incoloy) 
Yes 
Foldback 
.316 
19.25 
Threaded 
1-9/32 

11-1/2 
NPSM 
1-1/2

**Shipping weights and dimensions are for reference only for the purpose of calculating freight charges. 
For parcel shipping, dimensional weights are used by FedEx to determine the rate rather than the actual weight.


Shipping Weight Actual (lbs.):        1.225
Shipping Weight Dimensional (lbs.):        1.225
Shipping Height (in.):        1.8
Shipping Length (in.):        23.4
Shipping Width (in.):        3.55
Shipping UPC:        020352193274

 

 

Reviews (0)

Be the first to write a review

Additional info

SKU: SP10867QL
UPC: 20352193274
Condition: New
Width: 4.00
Height: 4.00
Depth: 24.50
Shipping: Calculated at Checkout